Product Description

Standard UF Base can be hand or machine applied. It is a high quality general purpose base coat with excellent workability qualities, designed to be used over medium density block work as a primary coat for any K Rend finish.

Find a Stockist

K Rend products are available from authorised retailers throughout the United Kingdom and Ireland

Features & Benefits

Standard UF Base provides a variety of benefits.

EASY TO FLOAT

Standard UF Base is easy to float.

IDEAL FOR DUBBING

Standard UF Base is the ideal product for dubbing out.

SUITS THIN COAT FINISH

Standard UF Base is suitable for thin coat finish.

HAND / MACHINE APPLIED

Standard UF Base can be hand or machine applied.

Product Specification

Technical Data
Require:

14 - 18kg / sq m approx.

| nominal 8-10mm thickness onto insulation substrates

Classifications according to

BE EN 998-1

Compressive strength:

CS III

Capillary water absorption category:

W2

Thermal conductivity:

P=50% - 0.41 & P = 90% - 0.47

Application Instructions
  • Primary Coat, where required should be applied to substrates as preparation for subsequent coats. Thickness should be as per product specification. It is important to take special care to straighten with a Darby / straight edge to ensure that the next coat is applied to uniform level
  • Form a light key only
  • Allow 24 hours curing time before further application, unless advised otherwise. For info on unusual substrates, seek technical advice.
Product Downloads
Technical Data SheetDownload PDF
Application InstructionsDownload PDF

Thin Coat Render Colours

We have a variety of Thin Coat render colours available and we recommend that all colours & textures are verified against a sample, before ordering.
  • Pure White
  • Limestone White
  • Light Bronze
  • Corn
  • Linen
  • Sky
  • Sunflower
  • Causeway
  • Mint
  • Antique White
  • Mocha
  • Golden
  • Rosemary
  • Granite
  • Mink
  • Pearl
  • Ash White
  • Wheaten
  • Pistachio
  • Biscuit

Products to compare:

View Comparison Table