Paints & Coatings

Our paints & coatings provide an attractive, matt, coloured finishes for exterior use.

Silicone Masonry Paint

Silicone Masonry Paint provides an attractive, matt, coloured finish for exterior use on masonry substrates.

It is manufactured with a combination of silicone resin and mineral fillers to provide outstanding water repellence.

Product Specification: Silicone Masonry Paint

Technical Data
Coverage:

18kg container of paint will sufficiently cover approx. 45–65m2 using two coats on a smooth surface, as per the application instructions

Coverage for textured surface:

approx. 30-36m2per 18kg container should be assumed

Coverage for very rough surface:

Furter reduced

Density:

Approx. 1.5 kg / litre

Water vapour permeability:

EN ISO 7783-2 Sd (m) <= 0.06

(Class I – high water vapour permeability)

Water absorption (24hr):

EN 1062-3 W (Kg/m2h0.5) <= 0.1

(Class III – Low water absorption)

Application Instructions
  • The paint should be stirred well prior to use
  • Full elevations and adjoining panels should be coated with the same batch of paint to ensure colour consistency
  • Apply a first coat of Silicone Masonry Paint, diluted up to 10% with clean water
  • Once the first coat has fully dried, apply a second coat of Silicone Masonry Paint, undiluted
  • The drying time between coats is approximately 8-12 hours
  • Silicone Masonry Paint can be applied by brush, roller and spray. Seek technical advice for further details
  • Do not apply this product at temperatures below 5°C or above 30°C
Product Downloads
Technical Data SheetDownload PDF
Application InstructionsDownload PDF

Mineral Paint

K Lime Mineral Paint is a highly breathable, naturally durable and environmentally friendly paint that provides an attractive, matt, coloured finish for exterior and interior use.

Product Specification: Mineral Paint

Technical Data
Coverage:

An 18kg container of paint will sufficiently cover approx. 45–65m2 using two coats on a smooth surface, as per the application instructions.

Coverage for textured and rough surfaces:

Further reduced

Density:

Approx. 1.45 kg/litre

Water Vapour Permeability:

EN ISO 7783-2 Sd (m) = 0.01

Water Absorption (24 hr)

EN 1062-3 W (Kg/m2 h0.5 ) = 0.17

(Class II – Medium water absorption)

Application Instructions
  • The paint should be stirred well prior to use
  • Full elevations and adjoining panels should be coated with the same batch of paint to ensure colour consistency
  • Apply a first coat of K Lime Mineral Paint, diluted up to 30% with clean water
  • Once the first coat has fully dried, apply a second coat of Mineral Paint. Where preferred, this can be diluted up to a maximum of 10% with clean water
  • The drying time between coats is approximately 8-12 hours
  • Mineral Paint can be applied by brush, roller and spray. Seek technical advice for further details
  • Do not apply this product at temperatures below 5°C or above 30°C
Product Downloads
Technical Data SheetDownload PDF
Application InstructionsDownload PDF

Colour Options

The Silicone Masonry Paint & Mineral Paint ranges have 21 standard colours.

Colour Enhance

Colour Enhance is an environmentally friendly, high performance water-based coating, designed to enhance the appearance of existing scraped render surfaces.

The product is formulated with an acrylic polymer and property enhancing additive to give long-lasting colour, good penetration, and excellent handling properties.

Product Specification: Colour Enhance

Technical Data
Coverage:

0.5 – 0.6kg / m² for a two-coat application onto textured render. Coverage dependent on substrate and application technique

Density:

1.31kg / dm³ approx.

Application Instructions

FIELD OF APPLICATION

  • Existing rendered substrates (both old and new)
  • Is suitable for application onto both scraped and unscraped finishes


PREPARATION

  • A test panel to check colour and final appearance is recommended
  • Surface should be fully cured, dry, level and free from efflorescence as well as loose or friable material including coating, oil, soot, lichens and dust
  • All necessary repairs to the render should be carried out before application
  • Treat fungal or algal growth with Algae Clean prior to coating with K Rends Colour Enhance
  • Mask all adjacent surfaces including windows, sills, doors, timber, glass, brick and flooring
  • Protect weather exposed surfaces


APPLICATION

  • The coating should be stirred before use
  • Apply a first coat of K Rend Colour Enhance diluted 10-15% with clean water onto dry substrate
  • Apply a second, undiluted coat once the first coat is dry
  • The drying time for the coating is approximately 3-4 hours
  • Coating can be applied by brush or roller. (For optimum results, extra-long pile rollers are recommended)
Product Downloads
Technical Data SheetDownload PDF
Application InstructionsDownload PDF

Would you like to learn more about our Paints & Coatings range and discuss your next project?

CONTACT US

Products to compare:

View Comparison Table