Product Description

K Rend Brick Rend can be hand or spray applied. It is normally applied to K Rend Base Coats in two different coloured coats, wet on wet. The top coat is then cut through to expose the mortar layer. The mortar joints create a brick effect finish. Detailed guidance and assistance including site training and samples can be arranged on request. Please seek advice from our Technical Support Centre for a detailed specification.

Find a Stockist

K Rend products are available from authorised retailers throughout the United Kingdom and Ireland

Features & Benefits

Brick Rend provides a variety of benefits.

water repellent

Our silicone technology is completely water repellent and fully breathable.

Self Coloured

Brick Rend is self coloured and requires only the addition of water.

ready mixed

All our silicone render products come mixed and are ready to use.

hand applied

Brick Rend is applied by hand.

Product Specification

Technical Data
Mortar layer require:

10 - 15kg / sq m approx.

| nominal 6-8mm thickness

Face layer require:

5 - 10kg / sq m approx.

| nominal 3-5mm thickness

Classification according to

BE EN 998-1

Compressive strength:


Capillary water absorption category:


Thermal conductivity:

P=50% - 0.44

Application Instructions

First coat: K Rend Base Coat

Second coat: Brick mortar coat

  • The mortar layer is applied to a K Rend Base Coat, 8-10mm thick to line and level. Do not overwork.

Final coat: Brick face coat

Product Downloads
Technical Data SheetDownload PDF
Application InstructionsDownload PDF

Products to compare:

View Comparison Table